Searching Manually For A Station; Presetting Frequencies; Scanning Stored Stations; Aux-In Operations - Clarion VB475 Owner's Manual

Searching manually for a station

To manually move up through the radio frequencies, press and hold the BAND button.

Presetting frequencies

•
To preset the current frequency, hold one of the numbered buttons for two seconds.
•
To display the current frequency, press the DISP (D) button on the player. To display
the clock, press this button again.

Scanning stored stations

•
To scan the stored stations for the current band and play back each station for fi ve
seconds, press the down arrow ( ).
•
To scan the current band and auto store the available stations, press and hold the
down arrow ( ) for more than two seconds.

7. AUX-IN OPERATIONS

Before operating an external auxiliary source:
•
Make sure that the output from the external audio source is properly connected to
the AUX-IN.
•
Make sure the external audio source is turned on.
•
Change the source to AUX-IN by pressing SRC ( ) on the player or SRC on the
remote. The player plays back an external audio source through the auxiliary input.

Selecting the AUX-IN input source

With the power turned on (either by pressing the power button or loading a disc), press
SRC (source) on the player or on the remote until AUX-IN displays on the LCD.

AUX-IN Playback features

•
To pause, press play/pause ( ) on the player or the remote.
•
To resume play back, press play/pause ( ) again.
•
To play back the fi rst 10 seconds of each track beginning with the current track,
press the scan button: 4/SCN on the player or SCN on the remote.
•
To cancel scan mode, press the scan button again.
•
To play back all tracts randomly, press the random button: 5/RDM on the player or
RDM on the remote.
•
To cancel random play back, press the random button again.
26
VB475OwnersManual.indd 26 VB475OwnersManual.indd 26
VB475
1/27/2007 9:34:37 PM 1/27/2007 9:34:37 PM