Using The Accessories - Kärcher K 2.59 M Operator's Manual

WARNING
To avoid serious injury never point
spray nozzle at yourself, other per-
sons or animals.
Trigger gun with Electronic Power
Control (EPC) Function
Changing the pressure is simple with
Kärcher's Electronic Power Control
(EPC). By pulling/releasing the trigger
(the yellow part you grab) for less than
one second, the machine will switch
pressure settings. You can switch from
(3) maximum to (2) medium to (1) deli-
cate pressure and back again. No need
to return to the machine or change any
lance settings. All of this is done with
your hand.
– Setting 3 - Maximum:
Maximum pressure and water flow.
This is the rated PSI and GPM of
your pressure washer. This position
is set by the factory.
– Setting 2 - Medium:
Reduced pressure and water flow.
– Setting 1 - Delicate:
Gentle pressure and water flow.
Note: The EPC setting is saved for only
20 minutes after you finish your work. If
you take a break longer than 20 minutes
or you disconnect the pressure washer
from the power supply, the EPC setting
will be reset back to (3) maximum pres-
sure.
8
English

USING THE ACCESSORIES

Spray wand
This nozzle features a steady powerful
high pressure spray pattern, for general
cleaning.
Dirtblaster®
This nozzle features a 0º pencil jet
which rotates 360º for maximum dirt
cutting action, effectively increasing
cleaning performance up to 50%.
This nozzle combines the cleaning
performance of a 0º pencil jet with
the surface coverage of a wide angle
nozzle.
Not recommended for soft materi-
als, siding, painted surfaces,
decks or autos.
Always test an inconspicuous area
before cleaning with the Dirtblaster.