ADTRAN NetVanta 2054 Quick Start Manual

Configuring NetVanta 2054 for Internet Access
The NetVanta 2054 provides all of the functionality required for servicing Internet
Access to a private network, including Ethernet Connectivity, built-in Switch, Firewall,
and Network Address Translation (NAT).
Overview
The NetVanta 2054 is a standalone Internet Access device for small private networks.
The NetVanta 2054's Public interface is connected to an Internet Access Ethernet
connection. The NetVanta 2054's four port switch provides connectivity for the private
network. The four port switch can be directly connected to hosts in the private network,
or to an external switch (such as the NetVanta 1224) to expand the number of available
switch ports.
Requirements
The NetVanta 2054 requires an Ethernet interface connection; T1 and other non-Ethernet
interfaces cannot be connected directly to the NetVanta 2054.
Software Requirements
• Modern Web Browser for access to the Web Interface
o Examples: Internet Explorer 5 or Higher, Mozilla Fire-Fox 1.0 or Higher
Hardware Requirements
• NetVanta 2054 and Power Adapter
• Two Ethernet Straight Through Cables
• Ethernet Internet Access Point
o Example: ADSL Modem, Cable Modem or Ethernet Fiber Converter
o ADSL Modems must be set to "Bridge Mode" before configuring the
NetVanta 2054; NetVanta 2054 will Terminate the PPPoE Connection
Information Requirements
• Public IP Type
o Static or Dynamically Assigned?
• Private Network Subnet