How To Use - Panasonic ES-LS9A Operating Instructions Manual

3
Slowly insert the
cleaning liquid unit
[B ] into the self-
cleaning recharger
[B] until it clicks.
Notes
• To replace the cleaning liquid, see page 22.
• Only use self-cleaning recharger detergent for
Panasonic shavers.
Not doing so may cause malfunction or failure.
• Do not tilt the self-cleaning recharger.
Doing so may cause spill or the number of days that
cleaning liquid can be used reduce.
• You can use the cleaning liquid for approximately
30 days if used once per day.
(This will differ depending on beard thickness and the
ambient temperature.)

How to use

This appliance has a smart lock function, so the power
switch is automatically locked to prevent accidental
operation when not shaving.
► Unlocking the power switch
The power switch is automatically
unlocked when the main body is grasped.
• The lamps glow and then turn off after
approximately 6 seconds.
16
► Locking the power switch
All the lamps turn off when The lamps glow and the
releasing the main body.
• The sensor may respond and the power switch may
be unlocked when an electrical device or metal object
is brought closer. This is not abnormal.
Shaving beard
1
Press and shave.
• The "shaving sensor", which
automatically adjusts the power
depending on the beard thickness,
will operate.
It will shave with high power on areas
where the beard is heavy, and reduce
the power on areas where the beard
is thin, to reduce burden on the skin.
power switch is
automatically locked after
1 minute.
• The switch lock lamp
( ) will light up for
6 seconds and turn off.