Panasonic ES-LS9A Operating Instructions Manual page 15

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
• The shaver can be used for approximately 2 weeks
with a full charge.
(Based on one 3-minute dry-shave usage per day in
an ambient temperature range of 20 °C – 30 °C.)
The number of usable days varies depending on the
following conditions.
- Beard thickness
- Pressure applied to the skin
- Usage frequency of the sonic vibration cleaning mode
• If there is noise from the radio or other sources while
using or charging the appliance, move to a different
location to use the appliance.
Charging without the self-cleaning recharger
• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug
[C ] into the shaver.
2
Plug the adaptor [C ] into
a household outlet.
3
Disconnect the adaptor
after charging is completed.
Note
You cannot operate the shaver while charging.
Preparing the cleaning liquid
Cleaning can start right after the usage by preparing in
advance.
(See page 18.)
• Remove the AC adaptor from the self-cleaning recharger.
1
Press the cleaning
liquid unit removal
button (1) and
remove the cleaning
liquid unit (2) on a
hard, flat surface.
• When the self-cleaning recharger is lifted, or on
the soft surface such as carpets, the lock release
lever will not fit in the recharger properly. In that
case, the cleaning liquid unit cannot be removed.
2
Pour tap water (1)
and detergent (2)
2
into the cleaning
liquid unit.
• Be careful not to let the
water rise above the
1
maximum water line (a).
• Pour the entire packet
of detergent.
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents