Preparation - Panasonic ES-LS9A Operating Instructions Manual

Preparation

Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the main body rear
terminals.
1
Insert the appliance plug
[C ] into the self-
cleaning recharger [B].
2
Remove the protective cap
[A1] while pressing the
side of the cap and insert
the shaver into the self-
cleaning recharger.
• Slowly insert the shaver into
the self-cleaning recharger
taking care not to damage the
system outer foil.
3
Plug the adaptor [C ] into a household
outlet.
• Check that the charge status lamp ( ) is glowing.
• Charging is completed after approx. 1 hour.
4
Disconnect the adaptor after charging is
completed.
14
Quick charge
Even though the battery runs out, you can shave
once after 3-minute charge.
(This will differ depending on usage.)
2
3
The number of the battery
1
capacity lamp will increase
as charging progresses.
Notes
• When charging the shaver for the first time or when it
• Recommended ambient temperature for charging is
While charging
glows.
has not been in use for more than 6 months, the
charging time may change or the charge status lamp
( ) may not glow for a few minutes. It will eventually
glow if kept connected.
10 °C – 35 °C. It may take longer to charge, or the
charge status lamp ( ) will blink quickly and the
battery may fail to charge properly in extremely high
or low temperatures.
After charging is
completed
"100%" appears and then
turns off after 5 seconds.