Table of Contents
Advertisement
2.3.2 Setting the Sample ID
2.3.3 Right- or Left-Handed Screen Option
5940018Operation.fm
Use this option to enter up to 25 sample identification tags (up to 10 characters
each) into the instrument. Sample IDs can be used to identify the location where
each sample was taken. (See Section 2.3 Using the Alphanumeric Keypad for more
information.)
1. Enter the Instrument Setup menu.
2. Touch
Sample ID
3. Enter the sample ID. Touch
Note: Spaces are not available in this function. Use underscore symbols instead.
Alternatively, if a sample ID has been entered and Sample ID is
active, touch the sample ID directly on the Hach Program screen.
Use the alphanumeric keypad to change the sample ID.
The screen layout is adaptable for use by either a right- or left-handed person.
1. Enter the Instrument Setup menu.
2. Touch
Screen Layout
3. Touch
Right-handed
General Instrument Operation
.
.
OK
.
or
. Touch
Left-handed
General Instrument Operation
.
OK
Page 23
Advertisement
Table of Contents
