Before first use
Please adhere the extra appliance
data plate (supplied) in the space pro-
vided in the "After sales service" sec-
tion of this manual.
Remove any protective foil and stick-
ers.
Cleaning the ProLine element
for the first time
Fill the oil reservoir to the max.
marker with water (approx. 1 gal (4 l))
and add a small amount of liquid dish
soap.
Turn the knob clockwise to 170°F
(130°C) and bring the water briefly to
the boil.
Switch the fryer off and drain the wa-
ter off into a heat-resistant container
(see "After frying" in the "Operation"
chapter).
Leave the fryer to cool down and then
raise the heater element.
Wipe the oil reservoir and all other
surfaces of the appliance with a
damp cloth and then dry everything.
Close the drain tap.
18
Switching on the ProLine ele-
ment for the first time
The metal components have a protec-
tive coating. When the ProLine element
is used for the first time, this causes a
smell and possibly also vapor.
The smell and any vapors do not indi-
cate a faulty connection or a defective
appliance and are not harmful to your
health.