Denon AVR-S970H Owner's Manual page 182

Contents Connections
8
Move the Sound calibration microphone to position 2,
select "Continue", then press ENTER.
The measurement of the second position starts.
Measurements can be made in up to six positions.
Audyssey Setup
Place the microphone at the ear level of the listener seated
at the 2nd listening position, which should be no more
than 60 cm away from the 1st listening position, then
select "Continue ...
Ear Height
• • • • • • • • • •
Back
n Stopping Audyssey
A Press BACK to display the popup screen.
B Press cursor Left to select "Yes", then press ENTER.
Front panel Display
Playback
2
Continue
Setup
®
Rear panel
Settings
9
Repeat step 8, measuring positions 3 to 6.
0 To skip measuring the fourth and subsequent listening position, press
cursor Left to select "Complete" and press ENTER to proceed to step 11.
10
Select "Continue", then press ENTER.
Audyssey Setup
Measurements complete.
Select "Continue" to analyze the data...
Repeat Last Test
Start the analysis and storage of the measurement results.
Analysis takes several minutes to complete.
0
The more speakers and measurement positions that there are,
the more time it takes to perform the analysis.
NOTE
0 When the measurement results are being saved, make sure the power is
not turned off.
182
Remote
Tips Appendix
Continue
Index