Output Settings; Hdmi Video Output; Video Mode - Denon AVR-S970H Owner's Manual

Contents Connections

Output Settings

Makes settings for video output.
o HDMI Video Output
Select the HDMI monitor connector to be used.
Auto(Dual)
(Default):
Monitor 1:
Monitor 2:
0 If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are
connected and "HDMI Upscaler" is set to "Auto", the signals are output with a
resolution that is compatible with both TVs. (v p. 168)
0 You can check which resolutions are compatible with your TV in "HDMI
Monitor 1" and "HDMI Monitor 2". (v p. 216)
0 When connecting multiple Dolby Vision TVs, the signal will only be optimal for
one TV. A TV connected to the HDMI MONITOR 1 connector has priority.
Front panel Display
Playback
The presence of a TV connected to the
HDMI MONITOR 1 or HDMI MONITOR 2
connector is detected automatically, and
that TV connection is used.
A TV connected to the HDMI MONITOR
1 connector is always used.
A TV connected to the HDMI MONITOR
2 connector is always used.
Rear panel
Settings
o Video Mode
Configure the video processing method to match the type of video
content.
Auto
(Default):
Game:
Movie:
Bypass:
0 If "Video Mode" is set to "Auto", the mode is switched according to the input
contents.
0 Information displays such as the volume bar cannot be overlaid with the video
signal when "Video Mode" is set to "Bypass".
0 This item can be set when "HDMI" is assigned for each input source.
167
Remote
Tips Appendix
Process video automatically based on
the HDMI content information.
Always process video for game content.
Minimize the video delay when the video
is delayed compared to the button
operations on the controller of the game
console.
Perform image processing that is suitable
for contents other than games.
Remove all video processing from the
HDMI video path.
Index