Denon AVR-S970H Owner's Manual page 181

Contents Connections
6
When the following screen is displayed, select "Begin
Test" and then press ENTER.
Start the measurement of the first position.
Audyssey Setup
Select "Begin Test" to start the calibration. NOTE: You will
hear a series of loud chirps starting and stopping during
the tests.
Ear Height
• • • • • • • • • •
Back
Measurement requires several minutes.
0
NOTE
0 If "ERROR" or "CAUTION" is displayed on TV screen:
0 Go to "Error messages" (v p. 185). Check any related items, and
perform the necessary procedures.
Front panel Display
Playback
7
Begin Test
181
Rear panel
Settings Tips
When the detected speaker is displayed, select "Next"
and then press ENTER.
Audyssey Setup
Speaker Detection
Front Yes
Center Yes
Subwoofer
Yes
Surround Yes
Surround Back No
Repeat Last Test
Remote Index
Appendix
Next