JVC KD-SC800R Instructions Manual page 25

3
Replace with another plate (a
standard, cutout, or downloaded
plate) of your preference.
• When attaching a standard plate
Standard plate
• When attaching a cutout or downloaded
plate
Add the transparent plate (supplied)
between the cutout or downloaded plate
and the plate cover in order to attach the
plate cover in place.
Cutout or
downloaded
plate
Plate cover
Notes:
• Be sure to keep the hex screwdriver for future use.
• Four spare screws for the plate cover attachment
are provided with the unit. (See the Installation/
Connection Manual.)
• When you attach the plate cover, do not tighten the
screws too hard; otherwise, the plate cover might
be cracked.
Plate cover
Transparent plate
(supplied)
How to use the cutout plates
1
Unfold the supplied cutout plates.
2
Cut the plates out using a scissors.
3
Trim out the window and two knobs using a
knife on a rubber mat.
25