Table of Contents
Advertisement
8. Press and hold the [
longer to store the message in memory and re-
turn to the display adjust mode.
∗ Press and hold the [BND] button for 1 second
or longer to delete the message. Then press
and hold the [
] button for 2 seconds or
longer to return the message to the default set-
ting.
9. Press the [DISP] button to return to the previ-
ous mode.
Setting the method for title
scroll
Set how to scroll in CD-TEXT, MP3/WMA TITLE.
∗ The factory default setting is "ON".
1. Press and hold the [DISP] button for 1 second
or longer to switch to the display adjust mode.
2. Press the [a]/[d] button to select "AUTO
SCROL".
3. Turn the [ROTARY] knob to select "ON" or
"OFF".
● ON:
Scrolls automatically.
● OFF:
Scrolls just 1 time when the title was changed
or you press and hold the [TITLE] button for 1
second or longer.
4. Press the [DISP] button to return to the previ-
ous mode.
Dimmer control
You can set the dimmer control.
∗ The factory default setting is "ON".
1. Press and hold the [DISP] button for 1 second
or longer to switch to the display adjust mode.
2. Press the [a]/[d] button to select
"DIMMER".
3. Turn the [ROTARY] knob to select "ON" or
"OFF".
4. Press the [DISP] button to return to the previ-
ous mode.
Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
∗ The factory default setting is "5". (Adjustment level:
1 to 16)
1. Press and hold the [DISP] button for 1 second
or longer to switch to the display adjust mode.
] button for 2 seconds or
Common Operations
2. Press the [a]/[d] button to select
"CONTRAST".
3. Turn the [ROTARY] knob to adjust the con-
trast.
4. Press the [DISP] button to return to the previ-
ous mode.
Adjust Mode
Setting the low pass filter
∗ This function can only be adjusted when the
subwoofer output is set to "ON" and the speaker
system is set to "5.1ch". For details on how to set
the subwoofer, refer to the subsection "Turning
on/off speakers" in the section "Changing Initial
Settings such as Menu Language, etc.".
∗ This function cannot be adjusted when as follows:
"Pro Logic" is set to "ON", the speaker system is
set to "5.1ch", DVD/DTS-CD is being played.
∗ The factory default setting is "THROUGH". If the
speaker system is set to "5.1ch", the factory default
setting is "50Hz".
1. Press the [ADJ] button to switch to the adjust
mode.
2. Press the [a]/[d] button to select
"SUB-W LPF".
3. Turn the [ROTARY] knob to select the setting.
Each time you turn the [ROTARY] knob, the
setting changes in the following order:
THROUGH ➜ 50Hz ➜ 80Hz ➜ 120Hz
4. Press the [ADJ] button to return to the previ-
ous mode.
Setting the amplifier bypass
circuit
∗ The factory default setting is "OFF".
1. Press the [ADJ] button to switch to the adjust
mode.
2. Press the [a]/[d] button to select "AMP
CANCEL".
3. Turn the [ROTARY] knob to select "ON" or
"OFF".
● ON:
Uses with connected AMP.
● OFF:
Uses with inside AMP.
4. Press the [ADJ] button to return to the previ-
ous mode.
45
VXZ758R
Advertisement
Table of Contents
