Nikon KeyMission 360 Quick Start Manual page 22

Turning the Camera On or Off
Turning On the Camera
Press and hold down the movie button for about
3 seconds to turn on the camera.
Shooting starts when the camera turns on by
pressing the movie button or photo button.
When the camera turns on, the power-on lamp
turns on.
You can check the battery level by looking at the
power-on lamp (A2) or the SnapBridge 360/170
app screen.
Turning Off the Camera
If you press and hold down the movie button for
about 3 seconds when the camera is on, the
camera turns off.
By default, if the camera is not operated for about
30 seconds, the camera turns off automatically
(auto off). You can change the setting using the
SnapBridge 360/170 app.
When the camera turns off, the power-on lamp turns off.
B
Turning Off the Camera During Remote Photography
The buttons of the camera are disabled during remote photography with the SnapBridge
360/170 app. To turn off the camera, exit remote photography.
See the SnapBridge 360/170 app online help for details about remote photography.
8
Getting Started
Power-on lamp