Getting Started; Step 1: Unpack; Step 2: Prepare The Remote Control - JVC UX-EP25C Instructions Manual

Getting Started

Step 1:
Unpack the package and check the
accessories.
Step 2:
Prepare the remote control.
Step 3:
Hook up the components such as
AM/FM antennas, speakers, etc. (see
pages 5 to 7).
Finally plug the AC power cord.
Now you can operate the System.

Step 1: Unpack

After unpacking, check to be sure that you
have all the following items. The number in
parentheses indicates the quantity of each piece
supplied.
• FM antenna (1)
• AM loop antenna (1)
• Speaker cords (2)
• Remote control (1)
• Batteries (2)
• iPod connection cable (1)
• iPod stand (1)
If any item is missing, consult your dealer immediately.

Step 2: Prepare the Remote Control

Insert the batteries into the remote control by
matching the polarity (+ and –) correctly.
1
2
3
• DO NOT use an old battery together with
a new one.
• DO NOT use different types of batteries
together.
• DO NOT expose batteries to heat or
fl ame.
• DO NOT leave the batteries in the battery
compartment when you are not going to use
the remote control for an extended period of
time. Otherwise, the remote control will be
damaged from battery leakage.
R6P(SUM-3) / AA (15F)
4