Basic Operations; Turning The Display On Or Off - BenQ RP6503 User Manual

Basic operations

Turning the display on or off

1. Be sure to follow the instruction of
2. At the back of the display, flip on the power switch located on the lower left side to
On. The system will enter standby mode.
• To turn on the display, press the power button on the control panel or on the remote
control.
• To turn off the display, press the power button on the control panel or on the remote
control. The system will automatically enter standby mode.
The display's standby mode still consumes power. To completely cut off power supply, set the power
switch to OFF (O) and then disconnect the power cord from the power outlet.
Signal receiver
Connecting power on page 16
Power button
21
Basic operations
.