Basic Operations; Turning The Display On Or Off; Turning Off The Display By Quickoff; Initial Setup - BenQ RP653 User Manual

Basic operations

Turning the display on or off

1. Be sure to following the instruction of
2. Before turning on the display, make sure the Power switch is set to ON. The system
will enter standby mode.
RP653 /
RP703
• To turn on the display, press the Power button on the control panel or on the
remote control.
• To turn off the display, press the Power button on the control panel or on the
remote control. The system will automatically enter standby mode.
RP653 /
RP703
The display's standby mode still consumes power. To completely cut off power supply, set the
Power switch to OFF (O) and then disconnect the power cord from the power outlet.

Turning off the display by Quickoff

Tap Apps (
remote control.

Initial setup

After you have connected the display to the power, you are ready to power on the
display. The first time you power on the display, you will be guided through a series of
Power
Switch
IR Receiver
Power Button
) > Quickoff (
Connecting power on page
RP750/
RP750k
RP750/
RP750k
Power Button
) on the screen to turn off the display without using the
Basic operations
22.
Power
Switch
IR Receiver
Power Button
23