Forming A Group-Form Gr; Forming A Group (Form Gr); Group - JVC NX-MD1 Instructions Manual

Forming a Group—FORM GR
This function allows you to form a group from a series of
tracks which do not belong to the other groups. You can
form a group from a single track.
Once a new group is formed, the other groups are
renumbered.
• You can form up to 99 groups on a single MD.
• To stop any time during the editing process after step 3 ,
press MD TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the
very first—that is, inserting a disc. You can also edit an MD
during playback (in Normal play mode).
1
Insert an MD you want to edit into the MD loading
slot while the unit is turned on.
2
Press MD TITLE/EDIT repeatedly until "FORM
GR?" appears in the main display.
• If you want to stop this editing process, press
ENTER.
3
Press SET.
• During playback:
The current track number starts flashing.
4
Press ¡/¢ or 4/1 to select the first track
from which a new group begins.
• You can select the track using number buttons. In this
case, the selected track starts playback repeatedly.
Ex. When track 3 is selected
• During playback:
The selected track starts playback repeatedly.
5
Press SET.
• If the selected track belongs to another group,
"GROUP TRACK" appears in the main display.
Select the track correctly in step 4 again.
• If you want to form a group from the selected track
only, go to step 7 .
• To cancel the setting, press CANCEL, then repeat
step 4 .
6
Press ¡/¢ or 4/1 to select the last track of
the new group.
• You can select the track using number buttons. In this
case, the selected track starts playback repeatedly.
Ex. When track 12 is selected
• During playback:
The selected track starts playback repeatedly.
7
Press SET.
• If the selected track belongs to another group,
"GROUP TRACK" appears in the main display.
Select the track correctly in step 6 again.
• To cancel the setting, press CANCEL, then repeat
step 4 .
8
Press ENTER.
"EDITING" appears in the main display for a while,
then "WRITING" flashes while the editing you have
made is being recorded on the MD.
To dissolve the group again, see the UNGROUP function
on page 53.
When "CANNOT FORM" appears in the main
display
You are trying to form a new group which includes another group
between the first track and the last one. In this case, dissolve the
group and form a new one again.
– 48 –
Continued