Playing At Random-Random Play; Repeating Tracks Or Cd-Repeat Play - JVC NX-MD1 Instructions Manual

To check the program contents
On the remote control ONLY:
Before playing, you can check the program contents by
pressing 4/1 or ¡/¢.
• 4/1 : Shows the programed tracks in the reverse
order.
• ¡/¢ : Shows them in the programed order.
To modify the program
Before playing, you can erase the last programed track by
pressing CANCEL. Each time you press the button, the last
programed track is erased from the program.
To add tracks in the program before you start play,
simply select track numbers you want to add.
To erase the entire program, before or after play, press
and hold CANCEL until "CD PROGRAM ALL CLEAR"
appears in the main display.
• Turning off the unit or ejecting a CD also erases the
entire program.
If you try to program a 33rd step
"MEMORY FULL" will appear in the main display.
If your entry is ignored
You have tried to program a track number that does not exist on the
CD (for example, selecting track 14 on a CD that only has 12
tracks). Such entries are ignored.
If the total playing time is over "1:39:59"
The total playing time will not be shown. ("– – : – –" will appear.)
Playing at Random—Random Play
The tracks of a loaded CD will play at random.
On the remote control ONLY:
1
Load a CD.
2
Press CD 3/8, then 7.
The source is changed to "CD."
3
Press PLAY MODE repeatedly until "CD
RANDOM" appears in the main display.
The RANDOM indicator also lights up on the display.
• Each time you press the button, play mode changes
as follows:
CD PROGRAM
(Program play)
CD NORMAL
CD RANDOM
(Random play)
(Normal play)
4
Press CD 3/8.
The tracks are played at random.
Random play ends when all the tracks are played once
(unless Repeat play is activated).
To skip the playing track, press ¡/¢ (or ¢ on the
unit).
• You cannot go back to the previous tracks by pressing
4/1 (or 4 on the unit).
To stop during playback, press 7.
To exit from Random play mode, press PLAY MODE
once or twice so that the unit enters another playback mode
(Normal play or Program play mode) before or after play.
• Pressing one of number buttons also starts Normal play
from the selected track.
Repeating Tracks or CD—Repeat Play
You can have all the tracks, the program or the individual
track currently playing repeat as many times as you like.
On the remote control ONLY:
To repeat play, press REPEAT during or before play.
• Each time you press the button, Repeat play mode
changes as follows:
REPEAT ALL
REPEAT ALL : Repeats all the tracks on the CD (in
Normal play or Random play mode), or
all the tracks in the program.
The
display.
REPEAT 1 : Repeats one track.
The
display.
REPEAT OFF : Cancels Repeat play.
To prohibit disc ejection—Disc Lock
You can prohibit CD and MD ejection from the unit,
and can lock the discs.
See "Prohibiting Disc Ejection—Disc Lock" on page
32 for details.
– 26 –
REPEAT 1
REPEAT OFF
(canceled)
indicator lights up on the
indicator lights up on the