CITROEN BERLINGO Handbook page 168

Driving
Operation
► In neutral, the monitoring rear view is
displayed by default.
► When reverse is engaged, the visual
reversing aid is displayed on the screen (even if
it is switched off).
► To change the view, press the end of the
lighting control stalk or press the corresponding
button located below the screen.
166
The area around the vehicle is shown by
the monitoring rear view and the
passenger side view only.
Operating limits
The system may be disrupted (or even
damaged) and not work in the following
situations:
– Installation of a bicycle carrier on the tailgate
or side-hinged door (depending on version).
– Attachment of a trailer to the towball.
– Driving with a door open.
Please note, the cameras must not be
obscured (by a sticker, a bicycle carrier,
www.carobook.com
etc.).
The field of vision of the rear camera
(surveillance rear view and visual
reversing aid) may vary depending on the
load in the vehicle.
If the side-hinged door is opened during
use of the surveillance rear view or the
visual aid for reversing, in forward gear or
reverse gear, the output screen becomes
grey.
If the front passenger door is opened during
use of the passenger side view, in forward
gear or reverse gear, the output screen
becomes grey.
If a trailer is attached to the towball,
when reverse gear is engaged the visual
reversing aid will no longer work until the
trailer is disconnected. The surveillance rear
view becomes the default view.
If the system develops a malfunction, go
to a CITROËN dealer to avoid any safety
problems.
Top Rear Vision
For more information, refer to the
General recommendations on the use
of driving and manoeuvring aids.
As soon as reverse gear is engaged with the
engine running, this system displays views of
your vehicle's close surroundings on the touch
screen using a camera located at the rear of the
vehicle.