JVC KS-BTA200K Instructions Manual page 15

for Type B
1
While "Bluetooth Phone" or
"Bluetooth Audio" is selected as
the source, select "New Device."
2
Display the menu, then select
"Bluetooth" ] "Open."
3
Enter the PIN (Personal Identification
Number) Code.
Refer to the instruction manual supplied with your
receiver.
• You can enter any number you like (1-digit to
16-digit numbers).
• Some devices have their own PIN code. Enter
the specified PIN code to the unit.
4
Use the Bluetooth device to search for
the unit.
• Enter the same PIN code (as entered in the
above step) on the device to be connected.
"Connected (and the device name)" appears
on the display.
for Type C
1
While "Bluetooth Phone" or
"Bluetooth Audio" is selected as
the source, select "New Device."
2
Press MODE, then select "Open."
3
Use the following buttons to enter the
PIN (Personal Identification Number)
Code.
4/¢: Move the entry position.
5/∞:
Select a number.
5:
Delete all entries.
1:
Enter the number.
• You can enter any number you like (1-digit to
16-digit numbers).
• Some devices have their own PIN code. Enter
the specified PIN code to the unit.
4
Use the Bluetooth device to search for
the unit.
• Enter the same PIN code (as entered in the
above step) on the device to be connected.
"Connected (and the device name)" appears
on the display.
for Type D
1
While "Bluetooth Phone" or
"Bluetooth Audio" is selected as
the source, press 4/¢ to select
"NEW."
2
Press ∞, then select "OPEN."
3
Use the following buttons to enter the
PIN (Personal Identification Number)
Code.
4/¢: Move the entry position.
VOLUME +/– (Control dial):
Select a number.
∞:
Enter the number.
• You can enter any number you like (1-digit to
16-digit numbers).
• Some devices have their own PIN code. Enter
the specified PIN code to the unit.
4
Use the Bluetooth device to search for
the unit.
• Enter the same PIN code (as entered in the
above step) on the device to be connected.
"CONNECT (and the device name)" appears
on the display.
Connection 13