Accessories; Using The Tv's Controller - Samsung 5 Series Installation Manual

✎
Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
✎
The items' color and shape may vary, depending on the model.
✎
The parts for the stand are listed under Stand Components on the following page.
y Power Cord
✎
The color and shape of the TV Controller may vary depending on the model.
✎
The TV's Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without the
remote control.
Power on
Adjusting the volume
Selecting a channel
Using the Function menu
Selecting the MENU (m)
Selecting the SMART HUB
( )
Selecting a Source (s)
Power Off (P)
✎
To close the Menu, SMART HUB, or Source, press the Controller for more than 1 second.
Standby mode
Your TV enters Standby mode when you turn it off, and continues to consume a small amount of electric power. To be safe
and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on
vacation, for example). It is best to unplug the power cord.
4
English

Accessories

y Safety Guide / Quick Setup Guide (Not available in all locations)

Using the TV's Controller

Remote control sensor
Turn the TV on by pressing the Controller when the TV is in standby mode.
Adjust the volume by moving the Controller from side to side when the power is on.
Select a channel by moving the Controller backwards and forwards when the power is
on.
To view and use the Function menu, press and release the Controller when the power
is on. To close the Function menu, press and release the Controller again.
With the Function menu visible, select the MENU (m) by moving the Controller to
the left. The OSD (On Screen Display) Menu appears. Select an option by moving
the Controller to the right. Move the Controller to the right or left, or backwards and
forwards to make additional selections. To change a parameter, select the it, and then
press the Controller.
With the Function menu visible, select SMART HUB (™) by moving the Controller
upwards. The SMART HUB main screen appears. Select an application by moving the
Controller, and then pressing the Controller.
With the Function menu visible, open the Source(s) screen by pushing the Controller
to the right. The Source screen appears. To select a source, move the Controller back
and forth. When the source you want is highlighted, press the Controller.
With the Function menu visible, select Power Off (P) by pulling the Controller
forwards, and then press the Controller.
Function menu
Left
TV Controller
Down (Front)
Right
Up (Rear)