Connecting The Radio Receiver - Clarion Navigation In-Car Entertainment User Manual

28
2. Plug the other end of the cord into the cigarette
lighter socket of your vehicle.
3. Turn the power on and your ready to use
N.I.C.E. for navigation.

Connecting the radio receiver

If you also have the NAVSIR satellite radio receiver
installed, follow these steps to connect it to the
N.I.C.E.
Chapter 2: Installation
1. Connect one end of the NAVSIR cable to the
external I/O port on the back of the N.I.C.E.
2. Connect the other end to the NAVSIR.
*
External I/O port
*Cable not
included
NAVSIR connection