JVC SP-MXJ100J Instructions Manual page 20

4
Set the off-time you want the unit to turn off
(on standby).
1) Press 4 or ¢ to set the
hour, then press PROGRAM/
SET.
2) Press 4 or ¢ to set the
minute, then press
PROGRAM/SET.
5
Set the volume level when the
unit is turned on.
The last set volume level appears
on the display.
Press 4 or ¢ to set the
volume, then press PROGRAM/
SET.
The selected source is displayed.
6
Press 4 or ¢ to select the source to play.
• Each time you press 4 or ¢, the source changes as
follows:
FM
TAPE
tunes into a specified preset FM station. = Press
FM:
4 or ¢ to select the preset station number.
tunes into a specified preset AM station. = Press
AM:
4 or ¢ to select the preset station number.
CD:
plays a disc from the 1st track of a selected disc.
• Make sure there is a CD on the selected disc
number tray.
TAPE: plays a tape in deck A or B.
• Make sure that a tape is in the deck whose deck
indicator (A or B) is lit on the display.
• As for Recording Timer setting, you can select only AM
or FM as a source.
7
Press PROGRAM/SET.
Press CLOCK/TIMER to finish the
Daily Timer setting.
PROGRAM/SET
PROGRAM/SET
AM
CD
PROGRAM/SET
CLOCK/TIMER
– 17 –
The unit enters Recording Timer setting mode.
8
Repeat from step 2 to step 7 for on-time
setting, off-time setting, volume setting and
source selecting.
The ‰ indicator remains lit.
9
Press POWER to turn off the
unit (on standby) if you have set
the Recording or Daily Timer
with the unit operating.
When the Recording Timer setting is finished,
The REC indicator lights up on the display.
To select Recording or Daily Timer after its setting
has been done
Press TIMER ON/OFF on the
remote control.
Each time you press the button, the timer
mode changes as follows:
‰ TIMER
OFF
‰ TIMER:
Select this when you want to use only
the Daily Timer.
‰ REC:
Select this when you want to use only
the Recording Timer.
‰TIM+REC: Select this when you want to use both
the Daily Timer and the Recording
Timer.
OFF: Select this when you want to cancel the
timer mode setting.
• When the timer is set to OFF, the
REC indicator goes off from the display.
Even if the Recording or Daily Timer is canceled, but the
setting condition for the Recording or Daily Timer
remains in memory.
• When the timer is set to on, the
REC indicator lights up again.
If the unit is operating when the timer-on time comes
Recording or Daily Timer does not work.
STANDBY
POWER
TIMER
ON/OFF
‰ REC
‰ TIM+REC
indicator and/or
indicator and/or