Playing Back Tapes; Playing Back A Tape - JVC SP-MXJ100J Instructions Manual

Playing Back Tapes

Playing Back a Tape

1
Press EJECT 0 for the deck you want to use.
For Deck A
2
Put a cassette in, with the exposed part of the
tape down.
• You can play back only type I.
3
Close the cassette holder gently.
If you put cassettes in both decks A and B, the deck which
you have put a cassette into last is selected.
To operate the other deck, press TAPE A/B.
4
Press TAPE 3 3 3 3 3 .
The tape play starts.
When the tape plays to the end, the deck
automatically stops .
To stop during play, press 7.
To operate the other deck, press TAPE A/B, then TAPE 3.
To fast-forward the tape, press ¡ or (¢ / ¡ on the
remote control).
To rewind the tape, press 1 or (4 / 1 on the remote
control).
To remove the cassette, press 0 EJECT for deck A or
EJECT 0 for deck B.
For Deck B
TAPE
– 14 –
The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.