Turning Off The Sound Temporarily; Changing The Display Brightness; Turning Off The Power With The Sleep Timer; Selecting The Analog Or Digital Input Mode - JVC RX-DV31SLAC Instructions Manual

c Operations

Turning Off the Sound Temporarily

From the remote control ONLY
Press MUTING to mute the sound.
"MUTING" appears on the display and the volume turns off
(the volume indication goes off).
• When "DVD" is selected as the source with your TV turned
on, "VOLUME –" appears on the TV.
ANALOG DIGITAL AUTO
PPCM AUTO SURROUND
L C R
DIGITAL
SUBWFR LFE
LPCM
MPEG-2 AAC LS S RS
To restore the sound
Press MUTING again.
• Pressing VOLUME + or – on the remote control (or turn
MASTER VOLUME on the front panel) also restores the
sound.

Changing the Display Brightness

From the remote control ONLY
Press DIMMER to dim the display.
• Each time you press the button, the display and illumination
lamp dim and brighten alternately.
Turning Off the Power
with the Sleep Timer
From the remote control ONLY
Press SLEEP repeatedly.
The SLEEP indicator lights up on the display.
• Each time you press the button, the shut-off time changes
as follows:
SLEEP indicator
ANALOG DIGITAL AUTO
PPCM AUTO SURROUND
L C R
DIGITAL
LPCM SUBWFR LFE
MPEG-2 AAC LS S RS
10
90
(back to the beginning)
When the shut-off time comes
The unit is turned off automatically.
DSP SLEEP PROGRAM REPEAT 1A-B RANDOM PROGRESSIVE RDS TA NEWS INFO
PL
GROUP TITLE TRACK CHAP. RESUME B.S.P BONUS TUNED STEREO AUTO MUTING
PL DSP SLEEP PROGRAM REPEAT 1A-B RANDOM PROGRESSIVE RDS TA NEWS INFO
GROUP TITLE TRACK CHAP. RESUME B.S.P BONUS TUNED STEREO AUTO MUTING
20 30 60
120 150 0 (off)
To check or change the remaining time until the shut-off
time
Press SLEEP once.
• The remaining time (in minutes) until the shut-off time
appears.
To change the shut-off time
Press SLEEP repeatedly.
To cancel the Sleep Timer
Press SLEEP repeatedly until "SLEEP 0" appears on the
display. (The SLEEP indicator goes off.)
INPUT ATT • Turning off the unit also cancels the Sleep Timer.
SPK 1 2 REC
AUTO MODE
A.POSITION
kHz
MHz
Note:
VOL
• If Auto Standby (see page 56) and Sleep Timer are used at the
same time, the one with the earlier shut-off time will turn off the
unit.
Selecting the Analog or Digital Input
Mode
When you have connected digital source components using
both the analog connection and the digital connection
methods (see pages 9 to 11), you can select the input mode.
• Before selecting the digital input mode, register the digital
input terminal setting correctly (see "Digital input (DIGITAL
IN) terminals" on page 25).
Note:
• You cannot change the input mode when selecting "DVD" as the
source. Digital input is always used for the built-in DVD player.
1
Press one of the source selecting buttons
(DBS, TV, or CDR) for which you want to
change the input mode.
2
Press INPUT ANALOG/DIGITAL (INPUT ATT.)
on the front panel or ANALOG/DIGITAL
INPUT on the remote control.
On the front panel
The current input mode appears on the display.
• Each time you press the button, the input mode
INPUT ATT
SPK 1 2 REC
AUTO MODE
alternates between the analog input ("ANALOG") and
A.POSITION
kHz
MHz
the digital input ("DGTL AUTO").
VOL
DIGITAL AUTO indicator
ANALOG DIGITAL AUTO
PPCM AUTO SURROUND
L
DIGITAL
SUBWFR
LPCM
MPEG-2 AAC LS
DGTL AUTO
From the remote control
PL DSP SLEEP PROGRAM REPEAT 1A-B RANDOM PROGRESSIVE
GROUP TITLE TRACK CHAP. RESUME B.S.P BONUS TUNED STEREO AUTO MUTING
C R
LFE
S RS
ANALOG
TO BE CONTINUED TO THE NEXT PAGE
RDS TA NEWS INFO INPUT ATT
SPK 1 2 REC
AUTO MODE
A.POSITION
kHz
MHz
VOL
14