Table of Contents
Advertisement
Explanatory Photos for DISASSEMBLY
• For the shooting direction of each photos used in this manual, see the photo below.
• A, B, C and D in the photo below indicate the shooting directions of photos.
• The photographs with no shooting direction indicated were taken from the top of the unit.
• Photos of NR1609 U are used in this manual.
The viewpoint of each photograph
(Shooting direction : X) [View from the top]
↓Shooting direction: B↓
↑Shooting direction: A↑
Attention :
When reinserting the Antenna Cable after it has been disconnected, make sure it is facing the direction
shown in A above.
�
1. FRONT PANEL ASSY
Proceeding :
TOP COVER
→
FRONT PANEL ASSY
(1) Remove the screws.
View from the bottom
(2) Remove the screws. Remove the CORD HOLDER and connectors. Remove the FFC.
CORD HOLDER
FFC
69
x4
x2
CP4401
x2
x2
x1
FFC
Advertisement
Table of Contents
