Suzuki NEXA BALENO Owner's Manual & Service Booklet page 260

OPERATING YOUR VEHICLE
Adjusting the image quality
When you adjust the image quality, per-
form the following procedure:
1) Set the parking brake firmly.
2) Press the engine switch to change the
ignition mode to ON.
(1)
3) After the opening image is finished,
press a camera switch (2)
(2)
5-75
4) 3D view mode image will be displayed.
Press the button (2) for adjusting the
image quality.
5) Adjust brightness and contrast of the
image to your preference.
NOTE:
• The figure of the set brightness varies
depending on ON/OFF condition of the
light.
• Refer to the owner's manual of infotain-
ment system for details.
55T050890
55T050530
Setting of the 360 view camera and the
front and rear traffic alert
When you change the setting, perform the
following procedure:
1) Set the parking brake firmly.
2) Press the engine switch to change the
ignition mode to ON.
(1)
3) After the opening image is finished,
press a camera switch (1).
55T050890