JVC VN-V26U Specifications page 7

6. Camera setup menu
a. Backlight Compensation
b. Video Compression level
c. Adjust JPEG size
d. White level
e. Black level
f. Color level
g. Gamma
h. Enhance
i. Auto/Manual White Balance
j. Shutter speed
k. AGC
l. Day/Night
m. Motion Detection
n. Snapshot function
o. Video Overlay
1. Camera ID
2. Text
3. Time/Date
4. Privacy Mask
7. Provide dual Application Program Interface (API):
a. Compatibility:
1. JVC
2. Verint VSIP
8. Provide guaranteed throughput level via QoS
E. Networking
1. Provide IP Camera with TCP/IP, UDP/IP, FTP, ICMP, ARP, DHCP, NTP, SMTP, HTTP
communication protocol
2. LAN compliance shall be IEEE802.3, 802.3u and 802.3af
3. Provide programmable IP address to allow multiple units on the same network
4. Provide Multicast capability allowing multiple, simultaneous viewing instances without
lowering frame rate
5. Maximum Clients:
a. 20 simultaneous users
b. Unlimited users by Multicast
F. Electrical
1. Input voltage:
a. Power over Ethernet (PoE) IEEE802.3af compliant
b. AC 24V, 50/60 hertz.
2. Power consumption:
a. DC 48V (PoE): 115mA (5.5W)
b. AC 24V: 0.35mA
3. Alarm input: NPN open collector, low level, latch or momentary,
mA current during low level. 3.3 VDC applied voltage during high level
4. Alarm output: NPN Open collector. 12 VDC, 50mA maximum inflow current.
5. White Balance: Continuous Auto Tracking White (ATW) or Auto White Control (AWC)
6. Black Level: 3 level adjustment
© Copyright 2008, Victor Company of Japan, Limited. All rights reserved. "JVC" is the trademark or registered trademark of Victor Company of Japan.
All non-metric weights and measures are approximate. Features and specifications are subject to change with out notice.
MasterFormat, SectionFormat and PageFormat are trademarks of the Construction Specification Institute.
Section 28.23.29 Video Surveillance Remote Devices and Sensors
7 of 10
VN_V25/26U_V.1_0608
(500 ms and above). 1