Sony HT-A3000 Operating Instructions Manual page 16

C:\HT2021\SD0\Data\CEK_CEL_E12\5034490111\5034490111HTA3000CEKCELE12\01GB-HT-
010COV.book Page 16 Sunday, August 22, 2021 1:43 PM
HTA3000CELCEKE12\070CON.fm
3
Align the "
printed on the WALL MOUNT
TEMPLATE with the bottom of your
TV, then adhere the WALL MOUNT
TEMPLATE on the wall with a
commercially available adhesive
tape, etc.
WALL MOUNT
Adhesive
TEMPLATE
tape, etc.
4
Fasten the screws prepared in step
1 securely into the screw marks on
 SCREW LINE" printed on
the "
the WALL MOUNT TEMPLATE.
270 mm
(10 3/4 in)
Marks
Screws
10 mm to
11 mm
(approx.
7/16 in)
16
GB
 TV BOTTOM LINE"
270 mm
(10 3/4 in)
5
Remove the WALL MOUNT
TEMPLATE.
6
Hang the bar speaker on the
screws.
Align the holes of the rear of the bar
speaker with the screws, then hang
the bar speaker on the two screws.
Notes
• When adhering the WALL MOUNT
TEMPLATE on the wall, smooth it out fully.
• Install the bar speaker apart from the TV
by 70 mm (2 7/8 in) or more.
Installing the Optional
Speakers
Refer to the operating instructions of the
optional speakers.
5-034-490-11(1)
masterpage: Left
HT-A3000