Table of Contents
Advertisement
Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
EXAMPLE: Storing an FM station of 88.3 MHz into the preset channel number 1 of the FM1
band
1
FM/AM
2
SSM
3
4
Repeat the above procedure to store other stations into other
preset channel numbers.
Notes:
• A previously preset station is erased when a new station is stored in the same preset channel number.
• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the stations again.
8
2
3
Select the FM1 band.
Tune into a station of 88.3 MHz.
See page 6 to tune into a station.
Press and hold the button (in this example,
number 1 button) until channel number flashes
(in this example "1ch").
\
ANA
"1ch" flashes for a few seconds,
showing that the station has been preset.
1
ANA
ANA
ANA
Advertisement
Table of Contents
