Table of Contents
Advertisement
Adjusting the sound
You can adjust the sound characteristics to your preference.
LOUD indicator
1
SEL
Indication
BAS
(Bass)
TRE
(Treble)
FAD
(Fader)*
BAL
(Balance)
LOUD
(Loudness)
VOL
(Volume)
Notes:
* If you are using a two-speaker system, set the fader level to "00."
** The loudness function can boost low and high frequencies to produce a well-balanced sound at
low volume levels. When the loudness function is "ON," the LOUD indicator changes from
to
on the display.
2
SEL
20
1
2
Select ("SEL") the item you want to adjust.
To do:
Adjust the bass
Adjust the treble
Adjust the front and rear speaker
balance
Adjust the left and right speaker
balance
Turn on or off the loudness function** ON — OFF
Adjust the volume
Adjust the level.
Note:
Normally the control dial works for volume adjustment. So you do
not have to select "VOL" to adjust the volume level.
Range
–6 (min.) — +6 (max.)
–6 (min.) — +6 (max.)
R6 (rear only) — F6 (front only)
L6 (left only) — R6 (right only)
00 (min.) — 50 (max.)
Advertisement
Table of Contents
