JVC GR-AXM225U Instructions Manual page 27

NOTES:
Before performing the following steps, make
sure that:
The Power Switch is set to "PRO.".
The camcorder is in the Record-Standby
mode.
The recording mode is set to "SP".
Select Wheel
MENU Button
Display
REC T I ME
O F F
1 / 4 S
/ 2 S
1
1 S
5 S
I NT . T I ME
O F F
1 5 S
3 0 S
1 M I N
5 M I N
1 5 S
1 S
INT. TIME and REC TIME indications on the normal
screen
NOTES (for Animation and Time-Lapse):
For best results, make sure the camcorder is secured when shooting in Animation or Time-Lapse mode.
Fade- or wipe-in/out cannot be performed during Animation or Time-Lapse shooting.
Before performing other operations following Animation or Time-Lapse recording, make sure the Animation
or Time-Lapse mode is deactivated.
Animation and Time-Lapse are canceled when the power is shut off or when the cassette is ejected.
Recording
Start/Stop Button
REC TIME Menu
INT. TIME Menu
Interval time
indicator
Recording time
indicator
Animation
You can shoot a series of pictures, each slightly different,
of the same object for a brief period of time.
1
Press MENU. The Menu Screen appears.
2
Rotate the Select Wheel to move the highlight bar to
"NEXT" in Menu Screen 1 and press it to display
Menu Screen 2. Then, move the highlight bar to
"REC TIME" and press it. The REC TIME Menu
appears. Rotate the Select Wheel to move the
highlight bar to the desired recording time, then press
it. The Menu Screen reappears with the highlight bar
on "RETURN".
3
Press the Select Wheel again to close the Menu
Screen.
4
Press the Recording Start/Stop Button after focusing
on the subject. The recording stops automatically
after the selected period of time.
•Repeat step 4 for the desired number of pictures.
5
To release the Animation mode, set "REC TIME" in
the Menu screen to "OFF".
Time-Lapse
You can record sequentially at preset time spans. Leaving
the camcorder aimed at a specific subject, you can record
subtle changes over an extended period of time.
1
Set "REC TIME" (
above).
2
Rotate the Select Wheel to move the highlight bar to
"INT. TIME" and press it. The INT. TIME Menu
appears. Rotate the Select Wheel to move the
highlight bar to the desired interval time, then press it.
The Menu Screen reappears with the highlight bar on
"RETURN". Press the Select Wheel again to close the
Menu Screen.
3
Press the Recording Start/Stop Button. Recording and
intervals alternate automatically.
4
To release the Time-Lapse mode, when "
displayed, press the Recording Start/Stop Button to
display "
"INT. TIME" in the Menu Screen to "OFF".
EN
step 1 and 2 of "Animation"
", then set "REC TIME" and
27
" is not