18
EN
P. STABILIZER Button
Display
Picture stabilizer
indicator
RECORDING
Picture Stabilizer
FEATURE:
PURPOSE:
To compensate for unstable images caused by camera-
shake, particularly at high magnification.
OPERATION:
Press P. STABILIZER. "
To switch off the Picture Stabilizer, press
P. STABILIZER. The indicator disappears.
NOTES:
Accurate stabilization may not be possible if hand
shake is excessive, or under the following conditions:
• When shooting subjects with vertical or horizontal
stripes.
• When shooting dark or dim subjects.
• When shooting subjects with excessive backlighting.
• When shooting scenes with movement in various
directions.
• When shooting scenes with low-contrast backgrounds.
Switch off the Picture Stabilizer when recording
with the camcorder on a tripod.
The "
" indicator appears blinking if the
Stabilizer cannot be used.
Basic Features (cont.)
"appears.