Table of Contents
Advertisement
WARNING. To reduce the risk of injury,
turn unit off and disconnect machine
from power source before installing and
removing accessories, before adjusting
or changing set-ups or when making
repairs. Be sure the trigger switch is in
the OFF position. An accidental start-up
can cause injury.
WARNING. Always wear eye protection
with side shields marked to comply with
ANSI Z87.1. Failure to do so could result
in objects being thrown into your eyes
resulting in possible serious injury.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from
various types of commercial solvents and may be
damaged by their use. Use clean cloths to remove
dirt, dust, oil, grease, etc.
WARNING. Do not at any time let brake
fluids, gasoline, petroleum based
products, penetrating oils, etc., come in
contact with plastic parts. Chemicals can
damage, weaken or destroy plastic
which may result in serious personal
injury.
LUBRICATION
Regularly check the gearbox cover. Refill with
suitable grease if necessary.
Unscrew the gearbox cover with a 2 pin wrench
and remove it (Fig.11).
Fill the gearbox with suitable grease.
Fit the cover back onto the product. Make sure they
are properly fastened.
REPAIR
This product does not contain any parts that can be
repaired by the consumer. Contact a qualified
specialist to have it checked and repaired.
Now that you have purchased your tool, should a need ever exist of repair or service, simply contact your
nearest Ryobi Authorised Service Centre or other qualified service organisation. Be sure to provide all
pertinent facts when you call or visit.
MAINTENANCE
STORAGE
Clean the product as described.
Store the product and its accessories in a dry,
frost-free place.
Always store the product in a place that is
inaccessible to children.
The ideal storage temperature is between 10°C
and 30°C.
We recommend using the original package for
storage or covering the product with a suitable
cloth to protect it against dust.
TRANSPORTATION
Switch the product off and disconnect it from power
supply before transporting it anywhere.
Attach transportation guards, if applicable.
Always carry the product by its handles.
Protect the product from any heavy impact or
strong vibrations which may occur during trans-
portation in vehicles.
Secure the product to prevent it from slipping or
falling over.
SERVICE
12
Fig. 11
Advertisement
Table of Contents
