Test Submenu - ADC PG-PLUS PLL-724 Manual

Test Submenu

4 Press to move up a menu level, or
ESC
This does not make the configuration changes permanent. The
make the changes permanent.
T S
EST UBMENU
PG-Plus supports testing of a subscriber drop in two ways. A test can be initiated by applying a test voltage
between the Tip and Ring at the COLU through an MLT test set, or by selecting it from the menu item through
the VT-100 terminal connected to the PAU/PMU maintenance port. The relays in the COLU and RT provide a
path for performing a SDT.
1 Select Test at the menu bar and press
2 Scroll to the desired POTS1 or ISDN1 option and press
3 Use the key to move to the desired circuit to test, then press
TAB
4 A warning displays when a channel is selected for the test.
34
+ to return to the PAU/PMU Main menu.
CTRL R
to display the submenu.
ENTER
to start the test:
ENTER
January 6, 2003
SCP-PLL724-010-04H
Save Configuration
option must be used to
.
ENTER
PLL-724 List 1