Table of Contents
Advertisement
SCP-PLL724-010-04H
S
D
UBSCRIBER
ROP
You can perform this function in one of two ways:
•
Initiate a test by applying a test voltage on the Tip at the COLU through an MLT set
•
With the VT-100 Terminal connected to the PAU or PMU maintenance port, select the Subscriber Drop Test
feature from the Test menu. Relays on the RT provide a path for performing a SDT. The results are reported
to the PAU or the PMU and presented as TA-909 resistive signatures.
A
DMINISTRATION
Performance monitoring is built into PG-Plus application. You can access the VT-100 port of the PAU or the PMU
to review performance measurements that provide an indication of the quality of transmission to the subscriber.
You can perform system administration functions, such as alarm checking and clearing, configuration changes,
performance monitoring, and testing for the COLU through the screens.
Connect a VT-100 terminal to the RS-232 interface on the front panel of either the PAU or the PMU to access the
COLU screens. If the system does not respond, verify the following values are present:
•
VT-100 terminal Hardware Flow Control is set to On
•
XON/XOFF is enabled
•
ASYNC parameters: Data = 8, Parity = None, Start/Stop = 1.
For further information on connecting a terminal and accessing the screens refer to the PAU or the PMU Technical
Practice.
The factory defaults given in this document are standard factory defaults. You may have a customized
version of the product, in which case, refer to the PG-Plus Customized Factory Defaults for the values
appropriate to the product version you have.
C
U
ONVENTIONS
Some screen shots in this document come from a prototype setup and may appear slightly different from what you
see on your Craft interface screen. The basic information and contents should be similar. This document uses the
following conventions for menus and shortcuts:
Example
menu
submenu
prompts
error
error text
nnnn
PLL-724 List 1
T
ESTS
T
D
SED IN
HIS
OCUMENT
Describes
name of menu item
name of submenu item
the place where you answer yes or no or type some other response
the name of what's wrong
an explanation of what's wrong
a variable, such as POTS unit 1 in a 6 POTS unit
January 6, 2003
Subscriber Drop Tests
9
Advertisement
Table of Contents
