Sony DCR-TRV19 Operating Instructions Manual page 119
Digital video camera recorder
Hide thumbs
Also See for DCR-TRV19:
- Operating instructions manual (220 pages) ,
- Service manual (95 pages) ,
- Operating instructions manual (260 pages)
Table of Contents
Advertisement
Recording an image from tape as a still image
Recording a still image from other equipment
You can use either A/V connecting cable or i.LINK cable. See page 93 for the
connection.
When connecting with the A/V connecting cable, set DISPLAY in
to LCD in the
menu settings. (The default setting is LCD.)
The POWER switch should be set to
.
Operate by touching the panel.
(1) Play back the recorded tape on the VCR, or turn the TV on to see a desired
program.
(2) At the point where you want to record, follow steps 2 and 3 on page 118.
Note
If the tape is in poor condition due to being used repeatedly for dubbing and so on,
your camcorder may not be able to record the image, or the recorded image may appear
jagged.
119
Advertisement
Table of Contents
