Sony DCR-TRV19 Operating Instructions Manual page 111

Selecting image quality and size
Selecting the still image size (DCR-TRV33 only)
You can select image size 1152 × 864 or 640 × 480 (When the POWER switch is set to
CAMERA or VCR, the image size is automatically set to 640 × 480.)
The default setting is 1152 × 864.
The POWER switch should be set to
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU to display the menu.
(3) Select STILL SET in
(4) Select IMAGESIZE, then press EXEC.
(5) Select a desired image size, then press EXEC.
The indicator changes as follows:
1152
3
Memory capacity of still images
Recorded images are compressed in JPEG format before being stored in memory. The
memory capacity of still images varies depending on the selected image quality mode
and image size. Details are shown in the table below.
1152 × 864 image size (DCR-TRV33 only)
Image quality
FINE
STANDARD
640 × 480 image size
Image quality
FINE
STANDARD
, then press EXEC (p. 179).
640
MEM SET 1
EXIT
STILL SET
BURST OFF
QUALITY
IMAGESIZE
r R
EXEC RET.
About 500 KB
About 150 KB
.
4
MEM SET 1
1152
STILL SET
BURST
QUALITY
1152 × 864
IMAGESIZE
640 × 480
REMAIN
r R EXEC
Memory capacity
About 200 KB
Memory capacity
About 60 KB
EXIT
12
RET.
111