Clarion DRX9575Rz Owner's Manual page 24

DSP Operations
To select the user memory, press BAND but-
ton 4 to select "G.EQ User" and press one of
Direct buttons $.
Editing/storing a G.EQ menu (User
memory)
1. Select a G.EQ menu which you want to edit
on the basis of.
2. Press ADJ button &.
3. Press the right or left side of SEARCH button
2 to select the frequency to be adjusted.
There are 50Hz, 100Hz, 200Hz, 400Hz, 1kHz,
3kHz and 12kHz available for the adjustment
frequency.
For details on each adjustment item, refer to
the owner's manual supplied with the
DPH7500z.
4. Tur n the Rotar y knob 3 clockwise or
counterclockwise to make the adjustment. The
adjustment range is from –12dB to +12dB.
5. Repeat steps 3 to 4 to complete the
adjustment and press ADJ button &.
6. Press and hold one of Direct buttons $ for 2
seconds or longer to store the edited contents.
You can give a title to the user memory. For
the inputting method of titles, refer to the
section "Entering titles" in "Operations
common to each mode".
Easy mode/DSP operations
DSP effect ON/OFF
The factory default setting is "ON".
1. Press A-M button % to select "DSP".
2. Press S button #. When the "ON" is lit in the
display, the DSP effect is set to "ON".
3. Press A-M button %.
Note:
• If the DSP effect is set to OFF, the adjustment
made in "DSP operations" is not reflected in the
music source.
Setting the listening position
1. Press A-M button % and select "DSP".
2. Press the right or left side of SEARCH button
2 to set the listening position type.
There are FULL SEAT, FRONT-R (only right
seat), FRONT-L (only left seat), FRONT (only
front seats), REAR (only rear seats) and PASS
available for the listening position types.
The factory default setting is "FULL SEAT".
28
DRX9575Rz
Making fine adjustment of the
listening position
1. Upon completion of setting the listening
position, press ENT button (.
2. Press the right or left side of SEARCH button
2 to select "RIGHT or LEFT" or "FRONT or
REAR".
3. Turn the Rotar y knob 3 clockwise or
counterclockwise to adjust the balance and
the fader.
4. Press ENT button ( to return to the DSP
mode.
Selecting a DSP menu
1. Press A-M button % to select "DSP".
2. Press BAND button 4 to select "DSP Basic 1"
or "DSP Basic 2".
3. Press one of Direct buttons $ and select the
desired a DSP menu.
To select the user memory, press BAND button
4 to select "DSP User" and then press one of
Direct buttons $.
Editing/storing a DSP menu (User
memory)
1. Select a DSP menu which you want to edit on
the basis of.
2. Press ADJ button &.
3. Press the right or left side of SEARCH button
2 to select the item to be adjusted.
There are EFFECT, DELAY, REAR MIX, REV.
TIME or ROOM SIZE and HIGH or LIVENESS
available for the items to be adjusted.
For details on each adjustment item, refer to
the owner's manual supplied with the
DPH7500z.
4. Turn the Rotar y knob 3 clockwise or
counterclockwise to make the adjustment.
5. Repeat steps 3 to 4 to complete the
adjustment and press ADJ button &.
6. Press and hold one of the Direct buttons $
for 2 seconds or longer to store the edited
contents.
You can give a title to the user memory. For
the inputting method of titles, refer to the
section "Entering titles" in "Operations
common to each mode".