Disassembly - JVC LS20C70BU Service Manual

3.1 DISASSEMBLY PROCEDURE
CAUTION AT DISASSEMBLY:
• Be sure to perform the SYSTEM SETTEING, at the end of
the procedure.
• Make sure that the power cord is disconnected from the outlet.
• Pay special attention not to break or damage the parts.
• When removing each board, remove the connectors as required.
Taking notes of the connecting points (connector numbers)
makes service procedure manageable.
• Make sure that there is no bent or stain on the connectors
before inserting, and firmly insert the connectors.
HINGE COVER
REAR COVER
1-6 (No.YA436)
SECTION 3

DISASSEMBLY

3.1.1 REMOVING THE STAND ASS'Y (Fig.1)
(1) Remove the HINGE COVER.
(2) Remove the 4 screws [A], then remove the STAND ASS'Y.
3.1.2 REMOVING THE REAR COVER (Fig.1)
• Remove the STAND ASS'Y.
(1) Remove the 4 screws [B], then remove the REAR COVER.
CAUTION:
• For the REAR COVER is attached tightly, it is easy to open
STAND ASS'Y
Fig.1
from the corner of the REAR COVER.
B
A