Maytag SD-4 User Manual page 5

Step 2
Cont.
Select Cycle
Time Dry/Air Fluff
This cycle can be used to regulate the drying time. Use
with Air Fluff, Delicate or Regular temperature set-
tings. For timed drying, turn the control dial until the
pointer points to the proper time setting in the Time
Dry/Air Fluff cycle.
Step 3
Press Start
Push this button to start the dryer. The
dryer door must be shut for the dryer to
operate. If the door is opened during the
cycle, the Start button must be pushed
again to resume the cycle once the door
is closed.
End of Cycle Signal
Shortly before the cycle is complete, an audible signal
will sound.
NOTE: Using the Air Fluff temperature setting will
require a longer drying time.
NOTE: The dial can be turned in either direction to
select a cycle. Once started, the dial will not advance
at a specific rate during the IntelliDry cycles. At first
the dial may not advance at all. Toward the end of the
cycle (when the load begins to dry) the dial will
advance at a more regular rate and much more quick-
ly. This is normal operation.
4