Existing Construction - JBL AS5 Simple Setup Manual

AS Series Owner's Manual

Existing Construction

Step One:
Remove the grille from the
speaker frame.
Step Four:
Cut the dry wall.
Step Seven:
Connect the speaker wires to
the baffle assembly and install
baffle assembly in frame.
Do not overtighten the baffle
screws.
9/11/98 12:51 PM Page 5
Level
Template
Tape
Step Two:
Determine the correct speaker
location.
Kerf Line
Step Five:
Place the mounting bracket on
the speaker frame using the
mounting guides (marked 3/8" ,
1/2" , 5/8" , and 3/4") corre-
sponding to the thickness of
the dry wall.
Step Eight:
Replace the metal grille.
1-1/2"
1-1/2"
1-1/2"
Step Three:
Determine the speaker-frame
location.
Step Six:
Place the frame assembly in
the wall.