JBL AS5 Simple Setup Manual page 7

AS Series Owner's Manual
AS SUB
Step One:
Remove the grille from the
subwoofer frame.
Step Four:
Loosen the eight phillips head
screws until the locking tabs
turn inward.
Step Seven:
Screw down each of the eight
phillips head screws. The tabs
will swivel into place and
secure the unit to the rear
surface of the drywall.
9/11/98 12:51 PM Page 7
1-1/2"
1-1/2"
1-1/2"
Step Two:
Determine the correct
subwoofer location.
Step Five:
Connect the speaker wires to
the baffle assembly.
Step Eight:
Replace the metal grille.
Step Three:
Cut the drywall.
Step Six:
Place the subwoofer in the wall.