Service - Husqvarna R112C5 Operator's Manual

• Make sure that the intake grille on the engine cover
is not blocked. Remove grass and dirt with a brush.
• Open the engine cover. Make sure that the cold air
intake is not blocked. Remove grass and dirt with a
brush.
To remove the covers
To remove the engine cover
1. Release the clips on the engine cover.
2. Fold the engine cover rearward.
To remove the belt cover
1. Release the clip on the belt cover.
2. Remove the belt cover.
516 - 001 - 26.01.2018
To examine the steering wires
1. The steering wires are correctly tightened if you can
manually move them 5 mm up or down in the groove
on the steering collar.
2. If the wires are too loose, let an authorized service
agent adjust them.
To do a check of the parking brake
1. Park the product on a hard surface that slopes.
Note: Do not park the product on a grass slope when
you do a check of the parking brake.
2. Press the parking brake pedal down (A).
3. Press and hold the lock button (B) and release the
parking brake pedal while the button is pressed.
B
A
Note: For R112C, R115C, the parking brake is on
the left side. For R112C5, the parking brake is on the
right side.
4. For R112C5, put the gearshift lever in the neutral
position (N).
5. If the product starts to move, let an approved service
agent adjust the parking brake.
6. Press the parking brake pedal again to release the
parking brake.
B
A
N
19