Agilent Technologies E5810A User Manual page 60

Installing the E5810A
Verifying Instrument Communication
2. Select Instrument at
SICL Address gpib0,22
1. Click the button (as required)
Find
to display all connected instruments
Where to Go Next
60
If you want to program instruments from your PC. Go to
"Installing and Configuring Agilent IO Libraries Suite"
page 61.
If you do not want to program instruments. This completes
the E5810 installation.
3. Click the button
*IDN?
to identify the instrument
4. Type command on
Instrument Command
line and then click
Query
on
Chapter 2