Clarion VRX925VD Owner's Manual page 71

1: Connecting the PHONE MUTE Terminal
The lead included with the unit must be connected to the specified position of the vehicle's
connector in order to use the "triggered audio mute for cellular telephones" function.
2: Use the attached extension lead when necessary. (Provided with this unit)
Note : Before making any installation, disconnect the car battery - (negative) cable.
3: If a Multiple Channel Processor (DVH920, sold separately) is connected and the amp of this unit
is used, set the select switch to "LINE IN". Then the AUDIO OUT (IN) terminal of the Tuner Amp
Unit is only available for audio input, not outputting the audio.
(LINE IN) D N (LINE OUT)
4: Connect to a separately sold external amplifier with a separately sold RCA cord (L, R).
Note : When the Multiple Channel Processor is connected, these terminals are only available for audio input.
5: Connect to a Rear View Monitor (sold separately) for the rear seat.
6: Connect to separately sold VTR equipment with a separately sold connection cord.
Purple/Black
Purple
Green/Black
Blue/White
Green
Brawn
Glay
Grass-green
Glay/Black
Orange/White
White/Black
Red
White
Yellow
(
Black
Blue
2
1
8
0
7
* 1
3
)
No.
1 REAR RIGHT B
4
2 REAR RIGHT v
3
FRONT RIGHT B
!
4
FRONT RIGHT v
5 FRONT LEFT B
6
6
FRONT LEFT v
7
REAR LEFT B
8
REAR LEFT v
@
9
+12 V MAIN POWER
0
Amplifier turn-on lead
5
!
ILLUMINATION
@
+12 V ACCESSORY
9
#
GROUND
$
CCD camera
%
VISUAL 2 terminal
¥
Radio antenna jack ( 2)
#
&
CeNET terminal
*
Phone mute (Brown) ( 1)
¡
(
Spare terminal (Yellow)
)
Parking brake (Grass-Green)
¡
AUTO ANTENNA
Description
71
VRX925VD