Iqinvision IQeye Sentinel Series IQ802 Installation And Operating Instructions Manual page 8

NOTE: Using a power source with specifications other than those defined
herein may result in errant functionality or damage to the camera, and
will void the product warranty.
2. CONNECTING DATA (ETHERNET) CABLE:
Route and connect the Ethernet cable to the Ethernet connections (RJ-45 or
Punch Terminal) labeled wall-side in the back box.
The two most common schemes for wiring CAT5 cables are 568A & 568B.
The 568B wiring scheme is widely used in the US, and for off the shelf CAT5
cables. New installations should use the 568A CAT5 wiring scheme. Either
wiring standard will work but you need to ensure that the standard you select
matches the building wiring.
Figure 6
Type 66 Punch Down Block
Figure 7
8