Denso Keyence Vision XG Series Manual page 8

画像処理システム／ＸＧシリーズ
3.1.2 Ethernet (TCP/IP) communication settings for XG series
Select [Setting Menu] - [System Settings] on XG Vision Editor to display the [Communications & I/O -
Ethernet(TCP/IP) Settings] window. Set the IP address and subnet mask so that the robot controller and XG series are
within the same subnet mask. Set CR for delimiter.
*For "Command & Data Output", set "8500" at all time. (Fixed value)
3.1.3 Other settings for XG series
(1) After creating a test flow with XG Vision Editor, select [Capture Settings] - [Trigger Settings] tab on [Flow View]
to display the [Trigger Settings] window. Select "External" for the trigger type and check the "Ethernet (TCP/IP)"
check box.
8