Communication Settings For Robot Controller And Device Used - Denso Keyence Vision XG Series Manual

画像処理システム／ＸＧシリーズ
3. Communication Settings for Robot Controller and Device
Used
Use a teach pendant to adjust the communication settings for the device to be used.
3.1 Communication via Ethernet (TCP/IP)
3.1.1 Ethernet (TCP/IP) communication settings on robot controller
Set the robot controller's IP address.
(1) Press [F6 Setting] - [F5 Communication and Token] - [F2 Network and Permission] to display the
[Communication Settings] window. Set the IP address and subnet mask so that the robot controller and
XG series t are within the same subnet mask.
7